Ford Zeta engine
Developed in the late 1980s by the Ford Motor Company, the Ford Zeta engine was a straight four, double overhead cam internal combustion engine intended to replace the Pinto and CVH models. The Zeta shared some parts with other Ford engines developed at the time, including the smaller Sigma I4 and larger Duratec V6. The engine shares its bore and stroke dimensions with the 2-valve CVH engine. Ford Power Products sells the Zeta in 1.8 L and 2.0 L versions as the MVH. Production of the engines, renamed Zetec (the rename occurred because Lancia owned the "Zeta" trademark), began at Ford's Bridgend plant in Wales in September 1991, with later production added at Cologne, Germany in 1992 and Chihuahua, Chihuahua, Mexico, in 1993. The first Zetecs displaced 1.8 L, with a 2.0 L version arriving quickly afterwards. The final Zeta Zetec was produced on December 10, 2004 at the Bridgend factory with over 3,500,000 built at that location. The engine fits the Ford T9, B5/iB5, G5M/G25MR, CD4E and MTX-75 gearboxes using the same bell bolt pattern as the Crossflow. Phases of Production
Overview of applications
2.0The 2.0 L Zetec shared its 84.8 mm (3.339 in) bore and 88.0 mm (3.465 in) stroke with its predecessor, the 2.0 L 2-valve CVH. On top of the 16 Valve DOHC head, the Zetec for the US Market Escort ZX2, Contour, and Cougar gained Variable Valve Timing on the Exhaust Cam, removing its requirement of EGR for US Emissions. A high 10.2:1 compression ratio and larger valves contributed to the SVT version's much higher output; while a special ECU tune that modified the Variable Valve Timing, among other settings, contributed to the 10% power increase on the ZX2 S/R. Applications:
TurboThe European Ford Focus RS featured a turbocharged version of the 2.0 L Zeta unit producing 215 hp (160 kW) and 229 lb⋅ft (310 N⋅m) of torque, although it was badged as Duratec-RS. See alsoReferencesExternal linksWikimedia Commons has media related to Ford Zeta engine. |